模組測試演示網址
https://v.youku.com/v_show/id_XNjQ5MDQ4MzA4.html
該模組相對於傳統的L298N效率上提高很多,體積上也大幅度減少,在額定範圍內,晶片基本不發熱,當然也就顯得更加嬌貴,所以我們建議有一定動手能力的朋友使用,接線的時候務必細心細心再細心,注意正負極性。
TB6612的的用法:
TB6612是雙驅動,也就是可以驅動兩個電機
下面分別是控制兩個電機的IO口
STBY口接單片機的IO口清零電機全部停止,置1通過AIN1 AIN2,BIN1,BIN2 來控制正反轉
VM 接12V以內電源
VCC 接5V電源
GND 就不多說了啊
驅動1路
PWMA 接單片機的PWM口
真值表:
AIN1 0 0 1
AIN2 0 1 0
停止 正傳 反轉
A01
AO2 接電機1的兩個腳
驅動2路
PWMB 接單片機的PWM口
真值表:
BIN1 0 0 1
BIN2 0 1 0
停止 正傳 反轉
B01
BO2 接電機2的兩個腳
Description: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU.
Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
Features:
- Power supply voltage: VM=15V max, VCC=2.7-5.5V
- Output current: Iout=1.2A(average) / 3.2A (peak)
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Built-in thermal shutdown circuit and low voltage detecting circuit
- All pins of the TB6612FNG broken out to 0.1" spaced pins
- Filtering capacitors on both supply lines
*退貨/退款權益說明:
1. 根據消保法規定,消費者均享有商品到貨七天猶豫期(非試用期)之權利
2. 但特別標定說明、特殊包裝商品不得拆封,否則恕不接受退貨。
3. 受理消費者的退換貨,從商品收訖起7天內為退換貨保證期,若超過此期間視同驗收完成不得退換貨。並請所有消費者注意以下事項:
(1)不良品退還經檢查與測試後,若發現商品本身並無瑕疵,消費者必須支付所有發生之相關費用。
(2)在您收到貨品後如因非人為因素之商品損毀、刮傷、或運輸過程造成包裝破損不完整者,請您儘速通知本公司客服人員,我們會進行商品瑕疵或損壞鑑定,並儘速將新品寄給您。
(3)所有要辦理退貨或換貨的客戶皆需E-mail或來電至客服中心,並提供:訂單號碼,退、換貨原因,您的姓名及聯絡電話,E-mail地址。
(4)若您所訂購之商品無問題而您欲退貨,運費需自付,退回的商品必須是全新狀態(不可拆封),包括主要商品、使用手冊、、週邊零件,否則賣家有權拒絕接受退貨。
(5)若商品因消費者個人不當使用拆卸產生人為因素造成故障、損毀、磨損、擦傷、刮傷、髒污、包裝破損不完整者,或是發票、附配件不齊者,恕不接受退貨。